If this is your first time using the watch builder, it may take a few minutes to load. But, stick around and your patience will be rewarded!
TOTAL: $0.00
Back to Watch Options
Watch Dial
Watch Strap
Watch Case
Watch Crown
Watch Dial
Watch Strap
Watch Case
Complete Selections
for Full Preview
Switch
TOTAL: $0.00
View Your Watch
Welcome to the Railroad Edition Watch Builder

Design your one-of-a-kind, Railroad Edition (51mm) watch starting with an antique, American-made, railroad grade pocket watch movement and dial. Each movement and dial combination is unique, and the pieces available are updated continuously, so come back often to check out new inventory!

If you have any questions or would like to schedule a design consultation (free of charge), an associate at Vortic is available by phone at 855-285-7884 or by email at info@vorticwatches.com.

Learn more about the Railroad Edition HERE.

Customize these features to build your watch:
Dial/Movement
Case
Crown
Strap
Custom Engraving
Dial/Movement

Railroad Edition watches contain a manually wound, mechanical movement (timekeeping mechanism) and dial (face) from an antique, American-made railroad grade, lever set pocket watch. Individuals commonly scrap pocket watch cases for their precious metal, leaving the original, approximately 100-year-old, mechanism orphaned. Vortic meticulously restores each timepiece to as close to original condition as possible. 

Railroad grade pocket watches, also known as Standard watches, were explicitly made for railroad employees. As such, they were the highest quality and most sought after watches of the time. American railroads decided upon a rigorous set of regulations to qualify timepieces as “railroad grade” due to their role in maintaining schedules for the American rail system.

Every watch is covered by Vortic's 2-year, comprehensive warranty.

Click an image below to preview
Show All
Under $3499
$3499-$3999
$4000+
The Chicago
1921 Elgin 19j 24141805
$3,295.00
The Springfield
1921 Illinois Bunn Special 21j 3857346
$3,995.00
The Boston
1946 Waltham Vanguard 23j 32400402
$3,495.00
The Boston
1913 Waltham 23j 19040848
$4,495.00
The Boston
1913 Waltham 23j 19002045
$3,995.00
The Chicago
1943 Elgin 21j 41306438
$3,495.00
The Chicago
1944 Elgin 21j 42209228
$2,995.00
The Chicago
1925 Elgin 21j 27702466
$4,995.00
The Springfield
1924 Illinois 21j 4540811
$3,495.00
The Springfield
1927 Illinois 21j 4955226
$3,995.00
The Cleveland
1925 Ball 999P 21j 16s RR B614440
$4,795.00
The Boston
1924 Waltham Vanguard 23j 16s RR 24604148
$4,995.00
The Springfield
1920 Illinois Bunn Special 21j 16s 3642926
$3,495.00
The Indiana
1925 South Bend 227 21j 16s 1131492
$4,795.00
Case

The Railroad Edition case is CNC milled from solid blocks of titanium or bronze. The titanium cases are much lighter than their bronze counterparts, but the bronze will take on a unique patina over time. A Black DLC (Diamond Like Carbon) coating is available for the titanium option.

A defining feature of all railroad grade watches is their setting mechanism. Instead of simply pulling out the crown to put the watch in "setting mode," the original railroad pocket watches required you to remove the front of the watch and actuate a lever to accomplish the same thing. This way, the time on these essential watches was never accidentally changed. Vortic's Railroad Edition of the American Artisan Series features a removable bezel that dramatically improves upon the original design. The Railroad Edition case protects the dial from access while the bezel is removed and is fully water resistant when the bezel is appropriately tightened.

The Railroad case is made for 16s railroad movements and features a 51mm diameter.

Click an image below to preview
Machined Bronze
Out of Stock
Standard
Machined Bronze cases have been CNC milled from a solid block of aluminum bronze. The watch will arrive shiny like the preview. Over time, it will take on a distinct, one-of-a-kind patina that is influenced by your lifestyle.
Machined Titanium
Out of Stock
Upgrade +$200
Machined Titanium cases have been CNC milled from a solid block of aerospace grade titanium. Titanium is the ultimate material for strength to weight ratio. Titanium has a darker look than steel, and due to its low thermal conductivity, feels warm to the touch. These characteristics create an enduring, highly wearable, distinctive piece.
Machined DLC Black
Out of Stock
Upgrade +$500
A DLC or "Diamond Like Carbon" coating is applied to our machined titanium case to create a uniquely black finish. While in the family of PVD coatings, DLC provides a small amount of transparency that allows us to see machine marks and surface detail while still appearing black. This coating is extremely durable and represents the best we have to offer.
Crown

The crown (winding knob) is located at 12 o'clock due to the pocket watch movement's orientation. All Railroad Edition crowns are custom machined in Vortic's workshop. 

Click an image below to preview
Bronze
Standard
The bronze crown will gain a dark patina over time as it interacts with oxygen in the air and oils on your skin. It's made from the same material as the bronze case option.
Titanium
Standard
The titanium crown is made from the same material as the titanium case option.
Strap

Vortic's timeless leather straps are hand-crafted in the United States from domestically sourced leather. The standard strap features four different colors while the cordovan straps come in classic black or rich oxblood.

Horween's Shell Cordovan leather, tanned in Chicago, is highly sought after for its ability to take on character as it wears. The buckle is CNC machined at Vortic to match your crown finish selection.

Click an image below to preview
Natural
Standard
Black
Standard
Tan
Standard
Navy
Standard
Cordovan Black
Upgrade +$50
Cordovan Oxblood
Upgrade +$50
Custom Engraving

American Artisan Series watches may be personalized with laser engraving on the case back. If you are not interested in engraving you may skip this section.

Please enter the text that you would like engraved in the text box below. You will be contacted following the sale to confirm your selection.

NOTE - engraving will not appear on the watch preview

Click an image below to select
Case Back
Upgrade +$100
Engrave the text of your choosing in one or two of the six sections on the case back. Each section allows up to 12 characters.
Total Price: $0.00

Review your selected options below and click the add to cart button when you are ready to order. An associate at Vortic will provide periodic updates and images of the finished build for final approval prior to shipment.

Normally it takes us a little over a month to build your custom watch, but occasionally it takes a few months to get a 100-year-old mechanism ready for your wrist.
Dial/Movement
Select a Dial
Case
Select a Case
Crown
Select a Crown
Strap
Select a Strap
Custom Engraving
None