If this is your first time using the watch builder, it may take a few minutes to load. But, stick around and your patience will be rewarded!
Watch Dial
Watch Strap
Watch Case
Watch Crown
Watch Dial
Watch Strap
Watch Case
Complete Selections
for Full Preview
Switch
TOTAL: $0.00
Welcome to the American Artisan Series Watch Builder

Design your one-of-a-kind, 12size (46mm) American Artisan Series watch starting with an antique, American-made, pocket watch movement and dial. Each movement and dial combination is unique, and the pieces available are updated continuously, so come back often to check out new inventory!

If you have any questions or would like to schedule a design consultation (free of charge), an associate at Vortic is available by phone at 855-285-7884 or by email at info@vorticwatches.com.

Learn more about the American Artisan Series HERE.

Customize these features to build your watch:
Dial/Movement
Select a Dial
Case
Select a Case
Crown
Select a Crown
Strap
Select a Strap
Custom Engraving
Dial/Movement

American Artisan Series watches contain a manually wound, mechanical movement (timekeeping mechanism) and dial (face) from an antique, American-made pocket watch. Individuals commonly scrap pocket watch cases for their precious metal, leaving the original, approximately 100-year-old, mechanism orphaned. Vortic meticulously restores each timepiece to as close to original condition as possible. Watches with more jewels (jeweled gear bearings for longevity) tend to be of a higher quality and value.

Every watch is covered by Vortic's 1-year, comprehensive warranty.

All movements on this Watch Builder are 12size making them all fit in our 46mm case.

Click an image below to preview
Case

Fully machined American Artisan Series cases are CNC milled from solid blocks of titanium.

All cases on this Watch Builder are for 12size (46mm) movements. If you'd prefer another size, check out our Store page, or send us an email.

Click an image below to preview
Machined Titanium
Out of Stock
Standard
Machined Titanium cases have been CNC milled from a solid block of aerospace grade titanium. Titanium is the ultimate material for strength to weight ratio. Titanium has a darker look than steel, and due to its low thermal conductivity, feels warm to the touch. These characteristics create an enduring, highly wearable, distinctive piece.
Sandblasted Titanium
Out of Stock
Standard
This case has been CNC milled from a solid block of aerospace grade titanium. We use pressurized, fine glass beads in a sandblasting chamber to soften the edges and make the finish uniform. Titanium is the ultimate material for strength to weight ratio. Titanium has a darker look than steel, and due to its low thermal conductivity, feels warm to the touch. These characteristics create an enduring, highly wearable, distinctive piece.
Bronzed Titanium
Out of Stock
Upgrade +$200
This case has been CNC milled from a solid block of aerospace grade titanium. We use pressurized, fine glass beads in a sandblasting chamber to soften the edges and make the finish uniform. We then bake the Titanium case in the kiln for a number of minutes at a very high temperature which turns the case into a bronzed color throughout. Titanium is the ultimate material for strength to weight ratio. Titanium has a darker look than steel, and due to its low thermal conductivity, feels warm to the touch. These characteristics create an enduring, highly wearable, distinctive piece.
DLC Black Titanium
Out of Stock
Upgrade +$500
A DLC or "Diamond Like Carbon" coating is applied to our machined titanium case to create a uniquely black finish. While in the family of PVD coatings, DLC provides a small amount of transparency that allows us to see machine marks and surface detail while still appearing black. This coating is extremely durable and represents the best we have to offer.
Crown

The crown (winding knob) is located at 12 O'clock due to the pocket watch movement's orientation. All American Artisan Series crowns are turned from a copper alloy in Colorado, then electroplated to achieve different finishes. The crown comes in two styles (round and knurled) and three finishes (raw copper, nickel, gold).

Click an image below to preview
Raw Copper
Standard
The raw copper crown will gain a dark patina over time as it interacts with oxygen in the air and oils on your skin.
Nickel
Upgrade +$20
This option has been electroplated with nickel to give it a lustrous, silvery finish.
Gold
Upgrade +$50
The electroplated gold crown is excellent for accenting features of the same color on many pocket watch dials.
Strap

Vortic's timeless leather straps are hand-crafted in the United States by our partner Worn and Wound.

Horween's Shell Cordovan leather, tanned in Chicago, is highly sought after for its ability to take on character as it wears. The buckle is made to match your crown finish selection.

Click an image below to preview
Black Out of Stock
Standard
Coal Out of Stock
Standard
Crimson Out of Stock
Standard
Mojave Out of Stock
Standard
Moss Out of Stock
Standard
Natural Out of Stock
Standard
Olive Out of Stock
Standard
Rye Out of Stock
Standard
Stone Out of Stock
Standard
Stout Out of Stock
Standard
Cordovan Black Out of Stock
+$50
Cordovan Oxblood Out of Stock
+$50
Add an Additional Strap

Choose a 2nd strap to come with your custom watch. We’ll ship the watch with the first choice attached and include this extra one in the box so you can mix up your style. We’ll also include a screwdriver so you can make the swap yourself!

No Addt’l Strap
Black Out of Stock
+$75
Coal Out of Stock
+$75
Crimson Out of Stock
+$75
Mojave Out of Stock
+$75
Moss Out of Stock
+$75
Natural Out of Stock
+$75
Olive Out of Stock
+$75
Rye Out of Stock
+$75
Stone Out of Stock
+$75
Stout Out of Stock
+$75
Cordovan Black Out of Stock
+$125
Cordovan Oxblood Out of Stock
+$125
Custom Engraving

American Artisan Series watches may be personalized with laser engraving on the case back. If you are not interested in engraving you may skip this section.

Please enter the text that you would like engraved in the text box below. You will be contacted following the sale to confirm your selection.

NOTE - engraving will not appear on the watch preview

Click an image below to select
Case Back
Upgrade +$100
Engrave the text of your choosing in one or two of the six sections on the case back. Each section allows up to 12 characters.
Total Price: $0.00

Review your selected options below and click the add to cart button when you are ready to order. An associate at Vortic will provide periodic updates and images of the finished build for final approval prior to shipment. Please note this is our 12size (46mm) watch which is our most popular size.

Select each of your watch options to continue.

Normally it takes us 2 or 3 months to build your custom watch, but occasionally it takes even longer to get a 100-year-old mechanism ready for your wrist. For that reason, if you need to receive the watch before a certain date, we recommend our Pre-Built watch selection.
Dial/Movement
Select a Dial
Case
Select a Case
Crown
Select a Crown
Strap
Select a Strap
Custom Engraving
None
View Your Watch